remoteAccess

KraussMaffei offers the right extrusion solution for all profile extrusion applications. The individual machines or coextrusion systems are used for processing PVC, PE or other materials. With a high level of system competence, we develop extrusion combinations with all the properties of modern profile production.

APC colorAdjust not only monitors color fluctuations without contact, but also directly adjusts them back to the color setpoint in the event of the smallest deviations. In this way, the processor achieves a high level of reproducibility even with input goods with a varying color spectrum. The color setpoint is quickly reached both when starting up the compounding or recycling process after a standstill and after a color change.

Direct extrusion is the combination of the two process technologies of compounding and processing in a single step. This technology offers processors decisive advantages, especially in the production of highly filled pipes. In addition, the single-stage process is gentle on the raw material, as it only has to be melted once.

KraussMaffei Schaumex and Schaumtandex lines combine matured process expertise with pioneering technologies to innovative extrusion concepts. The systems provide excellent product properties precisely for sheets made of polystyrene, low-density polyethylene foam, and polyethylene or high-density polypropylene foam.

Innovative productivity enhancement based on a well-proven line concept – ZE/KE Schaumtandex lines combine the groundbreaking ZE twin-screw extruder technology with the efficient cooling properties of the KE single-screw extruder.

The LFI-PU (long-fiber injection polyurethane) process is used in the production of high-strength, lightweight parts.

The four- or two-die pipe heads, specially developed for foam pipe systems, reduce the line speed at constant throughput.

purity compoundingLines are rated for throughputs of up to 6 t/h. The main benefit of this extrusion solution is the direct conversion of reclaim material into high-quality compounds in a single heat.

Our comprehensive range of mold carriers and plants makes KraussMaffei your expert partner for advanced PU processing. Whether you make refrigerator doors or vehicle instrument panels, leisure products or wall cladding – whatever your special requirements and tasks, we can offer you a wide range of machine components  that can be quickly and flexibly adapted to your individual needs at any time. 

Krauss-Maffei's QuickSwitch extrusion system shortens dimension changes in PO pipe extrusion. The QuickSwitch system is designed for four diameter ranges: for 25 to 63 mm, 70 to 160 mm 160 to 250 mm and 280 - 500 mm. Depending on requirements and application, both single-layer and multilayer polyolefin pipe can be produced.

Schaumex lines are the ideal solution for the production of high-quality foam products. The complete foaming process is performed in a single extruder – from polymer melting, blowing agent injection and incorporation up to melt cooling.

KraussMaffei pipe heads are the optimum solution for the production of single and multilayer polyolefin pipes. The basis of the pipe molds are the throughput-optimized spiral mandrel manifolds, for multilayer pipes several coaxially nested spiral mandrel manifolds.

Due to the modular design, the line configurations can be easily defined according to the desired profile cross sections as duplex, triplex, quadro, quinto, hexaplex unit.
They are designed in piggyback design on top of each other to achieve the highest product quality due to the symmetrical material flow in the extrusion head.

With the extensive modular range of barrel sections and screw components, the ZE 28 BluePower laboratory extruder is a future-oriented machine. It also provides a significantly larger processing window for small batch production with the screw diameter of 28 mm, its diameter ratio Da/Di of 1.65 and high performance of 42 kW with a screw speed of up to 1200 rpm.

KraussMaffei covers the entire value-adding chain with its product portfolio of co-rotating and counter-rotating technology for extrusion of composite materials made of renewable resources. 

You need expert support in optimizing processes, concepts, logistics, basic and detailed design, and interface coordination for your compounding system? Or you are planning to set up a new extrusion line? Then you need a strong partner with the necessary expertise in process technology support, facility design and turnkey solutions.

The parallel twin-screw extruders of the 36D series are specially designed for PVC processing. Their goal: maximum economic efficiency through high output and best product quality. Our broad product range with modular concept offers economical and high-performance production solutions tailored to pipe extrusion.

With their tailor-made technology, open-edge V-belt or V-ribbed belt systems offer production and investment security through high product quality and reliability. Depending on requirements, the extrusion lines can be equipped with various line components. 

Modern production solutions are required when manufacturing sheets in large quantities with high quality from different materials with individual properties. We offer fast and economical solutions.

In our product portfolio, you will find a wide range of cabinet foaming plants, door foaming plants, plants for commercial refrigerators and display cabinets, as well as cabinet and door foaming molds. 

These armor-plated mixing heads are modified versions of KraussMaffei linear and transfer mixing heads and have been developed specifically for processing PU systems with abrasive fillers.

KraussMaffei supplies individual machines and complete profile extrusion systems for all profile extrusion applications. Whether profiles made of PVC, PE or other materials – and irrespective of the profile type you want to produce – all options are open with our systems.

The new LRX EasyControl linear robots provide both beginners and experienced injection molding processors with an efficient solution for simple pick-and-place applications.

Counter-rotating twin-screw extruders are used worldwide for processing natural fiber-reinforced plastics such as wood-fiber composites.

Optimum melt degassing
Our KE single-screw extruders have proven themselves to be effective for degassing higher molecular residual monomers from PE or PS melt. They provide for high product quality and improve the functional properties.

KraussMaffei's lines for the production of technical films are designed specifically for customers and processes. They allow the production of a wide variety of films for

• automotive and automotive supplier industry
• building construction and civil engineering 
• electrical engineering
• Flexo printing
• the interior design

The KM-3L RKW 250 F³ multilayer pipehead processes engineering polymers such as polyamide.
The concept enables the production of three-layer pipes with a functional inner layer, which are preferred in the oil, gas and chemical industries due to their special properties, such as high chemical and abrasion resistance.

KraussMaffei's product portfolio comprises complete extrusion lines for profiles and hoses made from solid silicone rubber.

KraussMaffei offers a diverse portfolio of machine concepts for continuous devulcanization of rubber. Technologies and services are perfectly coordinated and integrated to deliver perfect results over the entire life cycle of the recycling plant.

In an automated CCM (Clear Coat Molding) process, premium quality parts are flow-coated with a transparent two-component polyurethane system. CCM mixing heads guarantee optimal temperature control for extremely delicate raw materials like wood. Even small output rates are mixed perfectly and poured into the mold cavity without bubbles.

KraussMaffei offers complete line concepts for the production of a wide range of PO boards and customer-specific PO special materials. All system components are perfectly matched to each other and cover a wide production spectrum.

The Comet metering machine shows its strengths when it comes to processing polyurethane formulations with abrasive fillers. It is also perfectly in tune with our guiding principle of providing immense machine flexibility in order to enable cost-effective use in the widest variety of projects.

The 32D twin-screw extruder series from KraussMaffei meets all the requirements for optimum profile extrusion. Excellent quality, maximum flexibility and increased cost-effectiveness are the advantages of this series.

The compact and highly efficient underwater pelletizers UWG are mainly used in LDPE homopolymer and copolymer plants. In combination with KE single-screw extruders, they guarantee reliable and high-quality production. 

More speed in pultrusion: further development of the pultrusion process offers more productivity and efficiency for straight and bent profiles.

KraussMaffei provides complete systems as a system solution from a single source. The machines from KraussMaffei are best designed from a process technology standpoint to process all current C-PVC mixtures (with an increased chlorine content of 62-69% and a density of 1.50 to 1.55 g/cm³) optimally.

To provide an exceptionally high-quality, scratch-resistant

Surface we have developed the ColorForm technology. The notable aspect here is that the thermoplastic base body is flow-coated with polyurethane (PUR) or polyurea (PUA) as a surface material in the second cycle after the injection molding process. The surface material (PUR/PUA) is injected directly into the cavity via the RimStar Flex ColorForm reaction process machine.

Single-screw extruders used as melt-fed discharge extruders are designed for numerous tasks in the field of incorporating basic additives into LDPE and copolymers with downstream pelletizing.

The compact construction of the coextruders guarantees their seamless integration into a complete production line – and the height and tilt settings integrated in the coextruders enable their simple connection to the required mold. Depending on the task, the coextruder's control system works either independently, speed-synchronized with the main extruder, or it is integrated seamlessly into the overall machine control system.

The Triplex Extrusion Lines 250 in horizontal or vertical design are specially designed for the extrusion of smaller profiles from a maximum of three different components for the bicycle and motorcycle sector. The lines have an excellent track record for reliable operation. They are characterized by low maintenance requirements and low wear.

IPC works with ambient air, which is sucked through the pipe to be produced in the opposite direction to the extrusion direction by means of a side channel blower or a radial blower. To ensure high heat transfer, the air is drawn through the pipe at high velocity. This results in a turbulent air flow at the inner wall of the pipe.

With the extrusion systems from KraussMaffei, you can easily coat rolls, sleeves or pipes for the most varied industries. The systems, with our high-performance rubber extruders, process every common rubber compound and coat them in the highest quality.

KraussMaffei's Roller-Head technology offers a perfect combination of precision and cost-effectiveness: tightest tolerances in the production of inner liners, nonwovens, edge covers or squeegee strips.

The special tried-and-tested mixing approach from the MKE-3B mixing head provides very even laminar polyurethane flow and excellent mixing.

KraussMaffei is a system provider for integrated, complete solutions for a wide variety of sheet products in PO processing.

The compact robots of the LRX series are a reliable pillar for your production.

The progressive design with decentralized control cabinet concept and rigid X axis provides a new form of accessibility. 

Auma technology is a synonym for highest quality and reliability in the production of coating foils, floor coverings, panelling, conveyor belts and many other multi-layer films and sheets made of thermoplastic polymers and elastomers.

The 26D machine series is one of the world's most successful and most widely used series. The machines feature an excellent price-performance ratio. They enable a lucrative entry into profile extrusion. However, established processors in new markets also value the machine for their expansion plans.

The servo sprue picker from KraussMaffei features a very compact and stable design. It forms a unit together with the machine, providing the optimal solution on the market for use in small spaces.

Excellent quality and absolute reliability - in order to prove itself in continuous use and to add to the economic success of the company, systems for preparing rubber compounds have to be prepared as well as possible to meet the high requirements.

PVC sheets – compact, foamed or coextruded – are a contemporary alternative to wood, sheets of fiber, and other compact materials. They can be further processed in many ways, refined, and are used in many areas of the construction and the advertising industries. 

KraussMaffei's strainer technology is based on a robust and reliable hot or cold feed extruder with or without gear pump. Thanks to an automatic screen changer, impurities are reliably removed from the rubber compound.

When it comes to producing plastic products from C-PVC, many years of experience in extrusion technology are required. KraussMaffei machines are optimally designed in terms of process technology to optimally process all common C-PVC compounds (with an increased chlorine content of 62-69% and a density of 1.50 to 1.55 g/cm³).

The hose extrusion systems unite innovative solutions of extrusion technology with the state-of-the-art downstream equipment technology. The result is a highly modern system, with which you are best equipped for the increasing challenges of the market.

Each machine can be upgraded individually: In the fully hydraulic CX series, KraussMaffei offers outstanding compact, efficient and flexible technology and provides the basis for expansion with all available special processes.

The KraussMaffei AUMA is ideally suited for laminating or vulcanizing rubber sheets, printing blankets, conveyor belts and roofing sheets in a thickness range from 0.5 to 20 mm.

Mini-Rollerhead consists of a rubber extruder and a two-roll calender for forming strips and narrow rubber webs. The compact design with edge trimming and material return, the precise and reliable gap adjustment produce exact webs with working widths of up to 0.45 m at line speeds of over 100 m/min.

Profile production systems – Create premium quality sealing for the automotive and construction industry KraussMaffei profile production systems are the globally leading technology for increasing productivity and efficiency when manufacturing profiles of rubber, TPE or silicon. 

Use to your advantage the first-class hydromechanical dual platen concept of the GX Series in conjunction with the single-piston injection system. Thanks to the modular design, the compact dual platen clamping unit can be individually configured with all available injection units.

Excellent cooling capacity

To meet the high quality standards, melt temperatures requiring effective and reliable melt cooling in the extruder must be maintained. With our barrels and "wet" liners, we offer an optimum solution to this problem. It provides high heat dissipation and outstanding cost-effectiveness. 

The low-pressure metering machines from KraussMaffei are particularly suited to producing small, complex, premium-quality parts made from polyurethane. 

The Schaumex and Schaumtandex ISO-TUBE lines meet the highest standards of quality, productivity and reliability in the production of PE, PP, PE/EVA foam pipes or profiles.

The 36D single-screw extruders are optimally suited for extrusion of foaming PO sheets. The surface of the sheet is closed-cell, while the internal core cross-section has a uniform, cell-shaped structure. The foam formation process is started with chemical propellant under the influence of temperature.

With systems of modular design, KraussMaffei meets the wants and needs of its customers in terms of low investment costs, high degree of pre-manufacture, and fast commissioning of turnkey systems.

The trend in PVC pipes for non-pressure applications is increasingly toward multilayer pipes. In a KraussMaffei pipehead, the three melt layers are not split by ribs once they have converged.

Adaptation to customer and part requirements is possible thanks to the standardized mold moving unit. Heat-balanced for optimal curing cycle Mold made of polishable tool steel or high-strength aluminum for excellent surface quality.

KraussMaffei provides reliable high-performance machines and systems along the entire value-adding chain in the production of physically foamed plastics sheets, pipes, and boards. They meet all of the requirements for an efficient extrusion process.

KraussMaffei, as a highly skilled system provider, for years has offered proven, integrated total system concepts for a variety of sheet products. The advanced application and process knowledge of our application engineers and getting all engineering work from a single source reduces your effort upon start of production and in the rest of the production process.

The systems prove themselves in daily use in manufacturing various tissue-reinforced hoses. Depending on hose type, the systems offer the highest capacity with the lowest personnel usage and, with that, set the benchmark in the fabrication of industrial hoses.

Customized roller-head lines continuously produce blister-free rubber sheets of up to 20 mm thickness from natural or synthetic rubber with maximum productivity.

The high quality of the uniform mixing is mainly the result of the special angle of injection into the mixing chamber. Components are recirculated at high pressure before each shot, in a tried-and-tested recirculation groove system. Transfer mixing heads are available for 2 to 6 components.

Flexible production options: The possibilities for combining several axes can be extremely varied. Several different application options for multiple kinematics in versions Twin X and Twin Z.

Excellent quality and absolute reliability - in order to prove itself in continuous use and to add to the economic success of the company, systems for preparing rubber compounds have to be prepared as well as possible to meet the high requirements. From the strainer solution to the rolling mill technology, the same principles for success apply to every system: the highest quality, maximum availability and flexibility and perfect integration into the workflow of rubber article production.

This compact and high-efficiency linear mixing head is ideal for processing quick-curing resin systems in a high-pressure RTM process for manufacturing lightweight and high-strength components.

As a systems supplier, KraussMaffei offers proven integrated line concepts for a wide range of PVC sheet products.

precisionMolding – the perfect introduction to the world of all-electric injection molding.

Crosshead extrusion systems consist of perfectly matched components to ensure reliable and precise operation.

KraussMaffei CapStrip line for the manufacture of jointless cap plies with nylon or hybrid cords for high-speed tires.

With its calendering technology portfolio comprising calenders of “I” or “inverted L” or “S” design with 2, 3, 4 or 5 rolls, KraussMaffei offers an extensive range of different solutions. The modular set-up and various accessories provide maximum flexibility and outstanding productivity.

The proven 36D single-screw series combines highest product quality with first-class efficiency. This series is supplemented by the 30D single-screw extruder series, which is used primarily for low output rates as a co-extruder.

The two series with processing units of different lengths are ideally equipped to meet market requirements for economical production.

As long as the coating was applied with precision.

Spiral mandrel pipeheads offer a number of production and process engineering advantages that pay off in many ways. The right pipehead for every application - KraussMaffei spiral mandrel pipeheads offer a wide range of combination options thanks to their modular design.

Most extrusion processes inevitably involvethe production of a certain amount of recyclable scrap, i.e. residual material that remains in the extruder or in the extrusion head in the event of compound or extrusion tool changes. In order to maximize added value, tire producers strive to recycle this scrap material by returning it to the production process.

As a competent system provider, KraussMaffei has been supplying proven integrated overall system concepts for a large number of film and sheet products made of PVC for years.

KraussMaffei tire systems are cost-effective solutions for continuous production of tire components at a high quality level. The systems are characterized by special machine designs.

Innovative ideas connect themselves to advanced technology to create a maximum of efficiency and reliability. KraussMaffei Berstorff hose extrusion systems form a unique, one-of-a-kind performance class for the highest quality and productivity requirements in the manufacturing of automotive hoses and shaped hose sections.

The complete solutions for the optimization of Sealant compounds are customized, ready-to-use systems from a single source. The core of the cascade system is a rubber extruder with gear pump and a twin-screw extruder, a unique combination from KraussMaffei.

The decisive prerequisites for cost-effective pipe extrusion are high production rates with consistently excellent pipe quality. The use of flawless and optimally matched PVC single-layer pipe heads also enables targeted cost reductions and high flexibility.

For every pipe application, we provide a system that is tailored to your wishes, from a single source. As a system provider, we offer critical competitive advantages for your production: the highest degree of flexibility and cost-effectiveness, combined with the best product quality.

Depending on the specific application, KraussMaffei Berstorff offers different line configurations composed of up to five single-screw extruders with screw diameters from 30 mm to 90 mm. These reliable lines are designed for processing polypropylene (PP) or thermoplastic elastomers (TPE) with different degrees of hardness.

The extrusion systems from KraussMaffei Berstorff set new benchmarks with their productivity and their innovative detailed solutions in hose fabrication. As a general contractor, KraussMaffei provides all services for the construction of a high-performance extrusion system.

The modular design of the Bead Technology offers a maximum of application flexibility with a safe and easy operation of the extruder and the head. The systems are designed for a maximum head outlet width of 36mm with a continuously adjustable bypass at a maximum line speed of 100 m/min.

Higher output rates in filling and reinforcing 

Depending on the apparent density of the filler material, UltraFeed vacuum degassing systems for twin-screw side feeders (ZSFE) achieve output rates. This makes the UltraFeed the ideal solution for filling and reinforcing compounds with talc, wood flour, light-weight chalk and other high-volume substances.

Hydraulic preloading gives increased operational reliability

Specifically developed for the ZE BluePower twin-screw extruder series, the hydraulic preloading system ensures reproducible screw installation and preloading. This system subjects the screw shafts only to a defined tensile stress without exerting any torsion load.

The Apex extrusion lines can reliably produce complex profiles for PCR and LTR tires.

We currently have the following configurations in our portfolio:

• Single extruder with GE 90 or GE 120
• Duplex  100 – 2 x GE 60  
• Duplex 200 – GE 60-90
• Duplex 300 – GE 60-150

Coextrusion technology opens up a wide range of possibilities: for example, through precise, reproducible coloring, high mechanical properties through sandwich construction, versatile surface design and cost-reduced use of materials. 

KraussMaffei offers cold and hot feed extruders from 45-300 mm screw diameter in different lengths. Our range includes smooth-bore, pin and pin-converting extruders as well as Pork Chop extruders for a wide variety of applications. The extruders offer a maximum of configuration possibilities from single to multiplex solutions, the last-mentioned with up to seven extruders.

Perfect mixing, optimum degassing and reliable cooling combined with high throughput rates

KraussMaffei single-screw extruders stand out for simple and robust machine construction, low need for maintenance, highest torques, and flexible configuration of the processing section.

KraussMaffei supplies systems and machines for producing all kinds of technical profiles such as profile strips, lamp covers, lamellae, and tile edge strips; the finished products are used in the automotive, furniture, electrical, and construction industries.

KraussMaffei offers oval conveyor systems for manufacturing high quantities. The mold carriers are mounted on roller units and continuously conveyed by the central drive in the oval conveyor system. 

POWERFUL. VERSATILE. DURABLE.

KraussMaffei is the market leader in large-scale injection molding machines. Our MX Series is recognized around the world and is principally characterized by the hydro-mechanical dual platen clamping unit, which we developed ourselves. The performance spectrum ranges from compact injection molding units with basic automation and highly complex production cells, through to complete factory planning.

KraussMaffei industrial robots implement complex demolding processes with a wide variety of grippers and freely programmable sequences of movements for wide swiveling ranges. Six axes enable enormous flexibility, even in spots where linear robots cannot be ideally used.

Linear mixing heads operate on the counterflow injection principle: Pressure energy is transformed into speed energy, reliably ensuring very thorough mixing of the components. The mixing heads are available in designs for 2 to 5 components.

The KraussMaffei calibration device is mounted on an electrically movable frame and essentially consists of the cooling mandrel, a slitting device, and an air cooling ring. The mandrel is cooled by a separate heat-balancing unit. To cool the inside of the sheet tube there is also an adjustable blower.

The KE/KE Schaumtandex line is the all-rounder for a wide variety of applications in physical foaming of plastics. The single-screw extruder for melting and mixing the plastic, which is unique in its class, provides optimum melt homogeneity.

Single- and twin-screw extruders from KraussMaffei are valued as reliable and efficient technology in solvent-based recycling. Compared to other solutions, they are equipped with many process engineering innovations. They offer the plant operator great safety and efficiency. We develop sustainable and cost-efficient solutions with our customers.

KraussMaffei rubber profile production lines are designed for the most different types of premium-quality profiles: hollow or solid, with smooth or rough surfaces, with individualized contours and with or without steel reinforcement.

Companies can become lucratively involved in profile extrusion with the XS Series, one of the world's most successful and most widespread series. Due to the excellent price-performance ratio, the machines also impress well-established processors on new markets in their expansion intentions.

KraussMaffei is the specialist in all types of punching and trimming and in linking trimming systems to complete, automated production lines. You benefit from our comprehensive expertise.

The mobile automation cell was specifically developed for the flexible production of injection molded parts. 

Whether you are processing PVC or PO, KraussMaffei has everything you need for producing plastic pipes from 5 mm to 2,000 mm in diameter – including automation components for maximizing material savings.

Reliable, compact electric drives for cost-effective and user-friendly operation. 

KraussMaffei thermoforming sheet lines with inline compounding enable exemplary efficiency in the production of high-quality films for a wide range of packaging applications.  The twin-screw extruders of this system also combine in a continuous process the otherwise separate process steps of compounding and sheet extrusion.

The PX series is the answer to your requests for more flexibility while increasing productivity. You can assemble your PX precisely to your production requirements from a wide selection of components based on a modular design. 

The ZE BluePower twin-screw extruder series stands out for numerous innovative features in terms of energy efficiency and process engineering. This series is designed to meet the most demanding market challenges as to output rate, product quality, process reliability and flexibility. Benefit from the multitude of energy-saving innovations and the perfectly matched components of this trendsetting twin-screw extruder series. 

Rapid and reliable configuration solution for processing sections

ScrewCon 3 is a highly flexible and extremely user-friendly software for configuring twin-screw extruder processing sections on a PC. It provides schematic representation of housing and screw elements as well as visualization and documentation of the process section set-up.

ISO-Board Schaumtandex lines are the world's most successful systems for XPS thermal insulation boards. Amazing? Not really. KraussMaffei is well familiar with the challenging requirements that a Schaumtandex system must fulfill to create added value - both today and in the future.

Conical twin-screw extruders from KraussMaffei are particularly suitable for the medium and lower output range. They convince with a variety of advantages, especially in coextrusion applications. Further plus points are high process engineering flexibility and process stability.

The single-roller system is optimally suited for efficient forming of plane-parallel rubber profiles. The use of profiled dies also allows the extrusion of profiles contoured on one side.

The two-roll calender works in conjunction with the extruder and roll spreader head to precisely shape the rubber webs for subsequent processing steps. Bending-optimized rolls and hydraulic gap adjustment ensure an exact thickness profile with working widths of 0.6 - 3.8 m. 

Precise, reliable, user-friendly and economical in operation. These properties define our RimStar series. The core idea behind the design is having immense machine flexibility, meaning that the RimStar can be used in many applications in PUR processing. Thanks to its modular design, it supports flexible configuration, allowing it to be tailored to customer-specific requirements.

KraussMaffei extrusion coating systems prove themselves in daily use in the manufacturing of various fabric-reinforced webs, which are used for a wide range of applications in construction. The wide range of extruder and calender products makes them the ideal choice for every requirement. 

Strainer systems are the ideal investment for the future for many manufactures of rubber articles; they reliably remove contamination from rubber compounds

The linear robots of the LRX/LRX-S series from KraussMaffei distinguish themselves by their wide range of variants. They cover a clamping force range of 350 kN to 54,000 kN, and can be used universally for all types of injectionmolding machines – irrespective of brand or manufacturer.

KraussMaffei has developed spray mixing heads for many different spray applications with enhanced design freedom.

KraussMaffei provides molybdenum-based PTA hardfacing as standard wear protection for the top root-face edges on all parallel and conical twin screws. 

The C-Check measures the conductivity at variable production speeds. The system determines the electrical conductivity of the TREAD profile without contact. The measurement is performed in real time and can be visualized via a local control panel. An integrated interface also allows data transfer.

Costs can be reduced and quality improved by automatic hose centering heads synchronized with an X-ray measuring system that continuously measures the wall thickness,  the eccentricity and the outer diameter of the rubber hoses.

Raw material manufacturers provide PU components either in barrels, IBC containers or pumped from a tanker. 

Reliable, compact hydraulic drives for cost-effective and user-friendly operation. Adaptation to customer and part requirements is possible thanks to the standardized mold moving unit.

The two-platen hydraulic injection molding machine powerMolding stands for a high level of performance combined with rapid availability and ease of operation. With the modular machine concept with a selected scope of options, we offer you outstanding fast lead times to enhance your efficiency and competitiveness even more.

The LabStar laboratory line offers a high degree of process flexibility and is at the same time extremely easy to operate. Owing to its modular design, the system can be quickly adapted to different process tasks.